Skip to content

Threshold pace: what it is and four ways to find yours

What running threshold pace means, four ways to find yours (a race, a 30-minute test, LTHR, a lab test), and how to turn it into cruise intervals.

By Updated

Threshold pace is the fastest pace you can hold for a long time before the effort starts to run away from you. For most trained runners that's roughly the pace they could race for about an hour: faster than marathon pace, a little slower than 10K pace for anyone who runs a 10K in under an hour. Jack Daniels calls the feeling "comfortably hard": you could keep going, but you wouldn't want to chat.

It matters because so much else hangs off it. Pace zones are percentages of it, a lot of "tempo" and "cruise" sessions are set at it, and Fit File Forge uses it to turn effort cues such as "5K effort" or "marathon effort" into paces on your watch. Get it roughly right and those numbers fall into place. Get it badly wrong and every session lands at the wrong intensity.

There's no single correct number. Labs, coaches and apps each define "threshold" slightly differently. What follows are four practical ways to find a number you can train with, from easiest to most involved.

1. From a recent race

If you've raced a 5K, 10K or half marathon in the last couple of months, you already have the best input there is: a real, all-out effort.

Fit File Forge reads threshold pace as the pace of a one-hour race, and gets there with Peter Riegel's endurance formula, the same one its race predictor uses:

time₂ = time₁ × (distance₂ / distance₁)^1.06

Run that backwards to find the distance you'd cover in 60 minutes, and that distance over an hour is your threshold pace. Riegel fitted the 1.06 exponent to record performances lasting from roughly three and a half minutes to about four hours, so it describes how pace fades as races get longer. It's a good average, and a poor fit for some individuals.

Daniels gets to the same place by another road. His VDOT tables (built with Jimmy Gilbert from oxygen-cost and race-duration equations) turn a race time into a fitness score, and each score has a training "T pace" next to it. Both methods start from the same thing, a real race, and both treat threshold as roughly an hour's racing effort.

Two cautions. A race on a hilly or hot course will understate you, so pick a fair one. And the further the race is from an hour, the more the formula is doing the work: a 5K is fine, a mile is a stretch.

Free calculatorRace time predictorEnter one race result and see equivalent times and paces for 5K to the marathon.

2. A 30-minute solo test

No recent race? Joe Friel's field test is the standard alternative. Warm up well, then run 30 minutes as hard as you can hold evenly, alone, on a flat route or a track, as if it were a race.

  • Threshold pace: Friel takes your average pace for the whole 30 minutes.
  • Threshold heart rate (LTHR): press lap at 10 minutes; your average heart rate for the last 20 minutes approximates LTHR.

Thirty minutes alone is harder than it sounds, and most people go out too fast. Start at a pace you're sure you can hold, and only push in the last ten minutes.

A note on how this compares to the app. When Fit File Forge estimates threshold from your synced runs (rather than taking a number you entered), it looks for your best steady 30–60 minute effort and, if that run was shorter than an hour, takes 97.5% of its speed. That's deliberately a touch more conservative than Friel's test, because a run in your history may not have been all-out. A number you enter always wins over an estimate.

3. From your threshold heart rate

If you know your LTHR (from the test above, or from a lab), you can find a pace that matches it: on a calm day and flat ground, run steadily at your LTHR for 15–20 minutes after a warm-up and note the pace once your heart rate has settled.

This is the least precise of the four. Heart rate lags behind effort, drifts upward over a long run, and moves with heat and caffeine. It's best as a sanity check: if your race-based threshold pace puts you 10 beats above LTHR, one of the two numbers needs another look. For more on LTHR and zones built from it, see heart rate zones.

4. A lab or lactate test

In a lab, you run a series of short stages that get faster while someone samples blood lactate. The result is a curve, and "threshold" is a point on it. Which point depends on who you ask: there are dozens of published definitions, from a fixed 4 mmol/L to the point where the curve bends, and Faude and colleagues' review found they don't agree with each other. A good lab will tell you which one it used and give you paces for each zone.

Portable lactate meters bring the same idea into the field. That's the approach behind the Norwegian model's controlled threshold sessions; see the Norwegian method for amateurs.

A lab number isn't automatically better than a race. It's measured fresh, on a treadmill, in short stages. If your lab threshold and your race-based threshold disagree, your races are the ones that count.

Your pace zones from threshold pace

Once you have threshold pace, Friel's pace zones follow as percentages of it (the percentages are of time per kilometer, so higher means slower). From the 4:45 per kilometer above:

Friel % of threshold pace 4:45/km
ZoneNameRange
Z1Recoveryslower than 6:08/km
Z2Aerobic5:25/km–6:08/km
Z3Tempo5:02/km–5:25/km
Z4Threshold4:42/km–5:02/km
Z5Above thresholdfaster than 4:42/km

Zone 4 brackets threshold. Zone 5 is everything faster, which is why Fit File Forge labels it "above threshold" rather than VO₂max. Want them for your own number? The training zones calculator does the arithmetic.

Training at threshold: cruise intervals

Daniels' answer to "how do I train at threshold?" is cruise intervals: threshold-pace repeats with short rests. The rests are short enough that you never really recover, but long enough that you can run more total time at threshold than you could in one continuous tempo, and with better form.

The shape of the session:

  • Reps: 3 to 15 minutes each at threshold pace. A mile or 1,600 m is the classic.
  • Rest: short; Daniels uses about a minute's rest for every five minutes of running.
  • Total: Daniels caps a session's threshold running at about 10% of your weekly mileage.

With the 22:30 5K runner above, five 1-mile reps at 7:39 per mile with 60 seconds' rest is a complete, honest threshold session. If the last rep is a fight, the pace was too fast; threshold should end with something left.

Send these to your watch

Free as .FIT files from each workout's page, or send them to your Garmin from there.

Each workout's page has its own targets panel: enter a race time and the steps show your paces. Repeat a 5K time trial every six to eight weeks, and update the number when it moves.

Sources

  1. Jack Daniels. Daniels' Running Formula (3rd ed.). Human Kinetics, 2014.
  2. Jack Daniels, Jimmy Gilbert. Oxygen Power: Performance Tables for Distance Runners. self-published, 1979.
  3. Peter S. Riegel. Athletic records and human endurance. American Scientist 69(3): 285–290, 1981.
  4. Joe Friel. Joe Friel's Quick Guide to Setting Zones. TrainingPeaks.
  5. Oliver Faude, Wilfried Kindermann, Tim Meyer. Lactate threshold concepts: how valid are they?. Sports Medicine 39(6): 469–490, 2009.

Written by Caleb Wetherell; drafted with AI assistance and checked against the sources below.

Training information, not medical advice.

Want this at your paces, on your watch?

Describe it in plain words: your coach builds it at your numbers, ready to send to your Garmin.

Start free

Your coach drafts your first week free, from your Garmin training. No card.